1. Our product has the characteristics of wide use, fast cutting edge, smallsize, accurate and arbitrary adjustment, labor-saving applicabilityconvenient operation,and portability,lt is an effcient and ideal tool fostripping the insulation layer of cables
2. Rotate the handle to adjust the distance so that the cable is stuck by thebearing.
3.Loosen the fixing blade screw.
4. Adjust the depth of the blade so that it can peel of the main insulationlayer:
5. Rotate the fixing blade screw.
6. Grasp the cable and rotate the wire stripper to peel and cut
.7. When the peeling is completed, slightly loosen the handle and gently liftit upwards to peel and cut the main insulation surface clean.
Our Global Sources website：https://www.globalsources.com/yuhuan-dinghuang/homepage_6002100345580.htm
| Model | Scope of Application | Weight (kg) | Size (mm) |
| KBX-65 | Stripping of cables below 30-65mm (35KV) | 1.8Kg | 290x120x75mm |
| BX-40A/B | BX-40A is typically used for stripping the main insulation layer at the ends of 22-40mm cables (10Kv). BX-40B is typically used for stripping the semiconductor layer at the ends of 22-40mm cables (10Kv). | 1.8Kg | 290x120x75mm |
| BX-30Upgraded version | Stripping the insulation at the ends and the middle section of 15-30mm insulated wires or power cable cores | 1.8Kg | 280x80x50mm |
| BX-90A/B | Used for stripping the main insulation layer and semiconductor layer of 40-90mm high-voltage cable ends (110kV) | 2.5Kg | 490x90mm |
| BK50-105 | 50-105mm cable and semiconductor stripping, maximum stripping depth 15mm | 0.8Kg | 570x200x150mm |
