产品描述
1.微电脑控制系统,压接时自动检测压力,双重安全保护2.该工具配备了双活塞泵,其特点是快速处理连接材料
并转移到缓慢的压接会自动使系统处于高压状态。
如果识别出与设定的工作压力有偏差或电池电量不足,则会发出声音信号并闪烁红色显示。
3.一键控制,按下触发按钮开始工作,松开一半触发装置停止施加压力,按压回油开关将活塞退回至原始位置。
4.温度传感器使工具自动停止工作,当长时间工作温度超过60°C时,故障信号响起,这意味着工具必须等到温度降至正常水平才能继续工作。
1.Micro computer control system-automatically detect the pressurewhen itis crimping, with double safety protect.
2. The tool equipped with a double piston pump which characterized by afast approach towards the connecting material and transfer to highpressure automatically by slow crimping.lf a deviation from the seoperation pressure or low battery charges is dentified, an acoustic signasounds and a red display flashes
3.One key control- press the trigger to start working, half loosing thetrigger means stop forcing pressure, loosing fully means piston Retum tothe original postion.
4.A Temperature sensor makes the tool stop working automatically.When the temperature over 60’C under long time working, the faultsignal sounds,it means the tool can’t continue work until the temperaturereduced to the normal.
Our Global Sources website:https://www.globalsources.com/yuhuan-dinghuang/homepage_6002100345580.htm
| 型号Mode! | 剪切力Shear force | 行程Stroke | 剪切次数Number of cuts | 剪切范围Cutting Range | 电压/容量Voltage/Capacity | 毛重/净重Cutting Range | 充电时间Charging Time |
| XP-65C | 150/120KN | 62mm | 90times(饱和电压)Saturation Voltage | Ф45mmmax(铜/铝和铠装电缆)(Ф45mm max (copper/aluminum and armored cables)) | 21V/5.0Ah | 15kg/10-12kg | 1.0hours |
| XC-105C | 150KN/200KN | 62mm | 70times(饱和电压)Saturation Voltage | Ф85mmmax(铜/铝和铠装电缆)(Ф85mm max (copper/aluminum and armored cables)) | 21V/5.0Ah | 15kg/10-12kg | 1.0hours |
|
XC-120C |
150KN/200KN | 62mm | 50times(饱和电压)Saturation Voltage | Ф100mmmax(铜/铝和铠装电缆)(Ф100mm max (copper/aluminum and armored cables)) | 21V/5.0Ah | 15kg/10-12kg | 1.0hours |
| XC-135C | 150KN/200KN | 62mm | 40times(饱和电压)Saturation Voltage | Ф120mmmax(铜/铝和铠装电缆)(Ф120mm max (copper/aluminum and armored cables)) | 21V/5.0Ah | 15kg/ 10-12kg | 1.0hours |







